Setup - Stryker F-SFFFBER Instrucciones De Uso

INSTRUCTIONS FOR USE

Setup:

1. Position Spine System's wheels
5" (1525 mm) from end of table
section and remove Rail Clamps
from Handlebar.
2. Attach Rail Clamps to OR table.
Clip on near open area on table rail.
3. Slide to end of rail as shown and
tighten knob securely.
Make sure that the rail clamps are
fully locked onto the accessory
rails prior to loading a patient.
4. Raise leg to its maximum height using the Crank
Handle.
Document Number: 80028282
Version: B
Page 16
5"
(1525 mm)
Issue Date: 15 APR 2020
Ref Blank Template: 80025118 Ver. E