Cleaning And Care; Technical Data - Ottobock DynamicArm 12K100N Información Para El Paciente

Sound sequence
low, low, high,
low
very high, high,
low, very low
6 x low
low, high
INFORMATION
It is possible that only individual or several components can no longer be controlled.
4 Repair/maintenance
Since all movable mechanical components are subject to wear and tear, service is required every 2 years.
During the service visit, the entire DynamicArm will be inspected by the authorized Ottobock Myo-Service
and any necessary adjustments or replacements of worn parts will be performed.

5 Cleaning and care

Clean the product with a damp, soft cloth and mild soap (e.g. Ottobock 453H10=1 Derma Clean) when
needed. Ensure that no liquid penetrates into the system components.
Then, dry the prosthesis component with a soft cloth.

6 Technical data

Power supply:
Charging temperature:
Weight (dependent on forearm length):
Maximum lifting force:
Maximum load:
:
Flexion angle
Operating temperature range:
Storage and transport temperature in original packaging:
Humidity:
Service life of the prosthetic component:
Battery service life:
DynamicArm 12K100N / DynamicArm Plus 12K110N
Prosthetic component
Event DynamicArm
DynamicArm Function is
has been present
turned on
Decreasing No function
battery charge
level
Battery No function
charger was
connected dur-
ing operation
Prosthetic Function of the prosthetic component in question
component is is not possible
being control-
led
Electric rota-
tor
Function is
present
Function is
present
No function
Li-Ion battery
> 0 °C (32 °F)
approx. 1000 g
50 N
approx. 60 N
approx. 15° to 145°
5 – 40 °C (41 °F – 104 °F)
-25 – 70 °C (-13 °F – 158 °F)
15% to 93% relative humidity,
non-condensing
5 years
2 years
Hand/gripper
Function is
present
Function is
present
No function
Ottobock | 19