Control Panel Tc - Cuenod C 280 B 517/8 Manual De Utilización

Start-up
Description of functions

Control panel TC

TC
Electrical cabinet on burner
The electrical control cabinet holds all
the required components for the
operation of the device. The access
door, which can be locked, is fitted with
a window displaying the control panel
TC, signals and, inside, a magazine
containing the literature.
In the lower part, there is a removable
plate with the various stuffing boxes.
Thanks to such cabinet with easy
access, it is possible to install various
options :
A built-in power regulator in a
–
standardized space requirement of
48 x 48 or 48 x 96 mm.
Relays for data transmission to be
–
fitted on a 35 mm DIN rail ,in
abeyance under the control panel
(remove two screws 10 and tip out).
Coupling case on burner
Option for cabinet outside burner
B10 Measuring bridge [µ A DC] for
cell current
24 Link terminals between burner
and electrical control cabinet
11/2003 - Art. Nr. 13 013 506A
Description of TC functions
(control panel)
A2 Option, standardized locations 48 x
48 or 48 x 96 mm to install a power
regulator
F10 TC fuse, green light indicators
H1 Ignition output
H2 Mini. regulation output
H3 Rated output
H4.1 Safety valve
H4.2 Main valve
H10 Live TC
H13 Gas fuel
H14 Fuel oil as fuel
H15 Transformers
P1 Fuel oil hour metre
P7 Gas hour metre, three-position
switch
S1 General
0 Non current -carrying
1J Local mode
1H Remote-controlled mode
S2 Choice of power regulation
K
Manual mode with S3
Auto Automatic mode with S1J
S3 By pulse with S2KI
+/-
Power increase / decrease
S4 Fuel selecting with S1J
SA1 On cabinet, display of :
- program
- faults, red light indicator On and
resetting push-button
10 Two screws to be removed in order
to reach the cabinet and the
locations of the options
11 Under the TC, remove two screws
10 and tip out. 35 mm DIN rail and
terminals for the options
21 Name plate
22 Location reserved to install a power
regulator
23 Removable plate (to be pierced
through) for the stuffing boxes
EN
41