Stiga SENATOR Manual De Instrucciones página 57

4. Start position – the electric start motor
is activated when the key is turned to the
spring-loaded start position. Once the en-
gine has started, let the key return to oper-
ating position 3.
To turn on the spotlight, turn the key to position 2.
Note! If the key is turned from the stop position
to operating position 2, the spotlight is activat-
ed. This uses up battery power. Do not leave the
machine with the key in position 2 (applies to
Pro16-Pro20).
10. GEAR LEVER (Senator)
A lever for selecting one of the five forward gears
in the gearbox (1-2-3-4-5), neutral (N) or reverse
(R).
The clutch pedal must be kept pressed in when
changing gear.
Note! You must make sure the machine is quite sta-
tionary before changing from reverse to forward
gear or vice versa. If a gear does not engage imme-
diately, release the clutch pedal and then press it in
once again, then engage the gear once again. Never
force a gear in.
11. POWER TAKE-OFF (Senator -
President - Royal - Pro16)
A lever for engaging and disengaging the power
take-off for operating front-mounted accessories.
There are two positions:
1. Lever in forward position – power take-
off disengaged.
2. Lever in backward position - power
take-off engaged.
12. POWER TAKE-OFF (Pro20)
Switch for engaging and disengaging the electro-
magnetic power take-off for operating front-
mounted accessories. There are two positions:
1. Press the front part of the switch – the
power take-off is engaged. The symbol
will light up.
2. Press the rear part of the switch – the
power take-off is disengaged.
All manuals and user guides at all-guides.com
ENGLISH
13. DIFFERENTIAL INHIBITOR
(Pro16 - Pro20)
Lever for engaging the differential inhibitor. This
improves the towing capacity by locking the rear
wheels so that both wheels drive simultaneously.
There are two positions:
The differential lever is of greatest use when the
rear wheels are unevenly loaded. For example,
when driving across a slope, where the upper rear
wheel is not as loaded, as well as when turning
sharp corners where the inner rear wheel bears a
lesser load.
When driving during the winter on slippery surfac-
es, the drive capacity is improved if snow chains
are not used.
When the differential inhibitor is engaged, the
steering is heavy. Avoid turning the steering
wheel!
14. HOUR COUNTER (President -
Royal - Pro16 - Pro20)
Indicates the number of working hours. Only
works when the engine is running.
15. CRUISE CONTROL (Royal -
Pro16 - Pro20)
A switch for activating the cruise control. The
function of the cruise control allows the drive ped-
al (5) to be locked in the desired position. You do
not need to use your right foot.
16. CUTTING HEIGHT ADJUSTMENT
(Royal - Pro16 - Pro20)
The machine is equipped with a control for using
the cutting deck with electrical cutting height ad-
justment (available as an accessory).
1. Forward position – the differential in-
hibitor is not engaged. For normal opera-
tion.
2. Lever in backward position - differen-
tial inhibitor engaged. Works for both for-
ward and reverse drive.
1. Press down the drive pedal until the de-
sired speed is obtained. Then press the
front part of the switch to activate the
cruise control. The symbol will light up.
2. Disengage the cruise control by press-
ing the rear part of the switch.
GB
57