Publicidad
Idiomas disponibles
Idiomas disponibles
TABLE OF CONTENTS
1. PRESCRIPTIONS AND GENERAL INSTRUCTIONS
1.1. Testing
1.2. Guarantee
1.3. Introduction
1.4. Prerequisites supplied by the customer
1.5. Instructions on requests for intervention
3.1. Applications, purpose, foreseen and unforeseen use, authorised
use
4. MORDINARY AND PROGRAMMED MAINTENANCE
4.2. Instructions for emergency operations in the case of fire
4.4. Periodic verifications
6. INSTALLANTIO
6.2. Description of installation operations
6.4. Power connection
TECHNICAL SPECIFICATIONS...........................................page 73
1. STANDARDS AND GENERAL INSTRUCTIONS
1.1. TESTING
The product is dispatched after visual, electrical and operating tests have
been passed.
1.2. WARRANTY
The warranty on the machine and related parts we manufacture is
valid for a period of 1 year from the date of invoice and consists of the
free supply of spare parts which, according to our fi nal judgement, are
deemed to be faulty.
It is the responsibility of the manufacturer to eliminate any faults
and defects on condition that the machine has been correctly used in
accordance with the instructions provided in the manual.
During the warranty period the customer will be responsible for costs
related to labour, travel or transfers, transport of the parts and any
equipment to be replaced.
The items replaced under warranty remain our property and must be
returned by the customer at the his own expense.
1.3. INTRODUCTION
This manual is intended to provide all the necessary information for
correct installation, operation and maintenance of the machine by
qualifi ed personnel.
Read the instructions provided carefully prior to any operation, as these
contain essential safety indications concerning the machine.
THE MANUFACTURER DECLINES LIABILITY FOR NON-DECLARED USE
OF THE PRODUCT.
THE REPRODUCTION OF THIS MANUAL OR PARTS THEREOF, IS
PROHIBITED.
GENERAL SAFETY INSTRUCTIONS
The manufacturer declines all liability for any operation performed on the
machine in disregard of the instructions provided in this manual.
Before connecting the machine to the power supply, ensure that
the voltage and frequency correspond to those indicated on the
specifi cations plate.
Always connect the machine to an appropriate high sensi-
tivity differential magnet circuit breaker switch (30 mA).
Before performing any cleaning or maintenance operation discon-
nect the machine from the power supply by:
1) Positioning the master switch on OFF;
2) Removing the plug.
Wear gloves to perform maintenance on the motor compartment or
on the evaporating unit positioned inside the machine.
Do not insert screwdrivers or other devices between the guards
(fan evaporator protections etc.).
Do not handle electrical parts with wet hands or without shoes.
Ensure good functioning of the compressor unit and evaporator by
never obstructing the air inlets.
In the case of machines fi tted with wheels, check that the rest
surface is fl at and perfectly horizontal.
In the case of machines fi tted with locks and keys, it is recom-
mended to keep the keys out of the reach of children.
Use is only reserved for suitable, trained personnel. Installation,
routine and extraordinary maintenance (for example, cleaning and
maintenance of the refrigerating system), must be performed by
specialised and authorised technical personnel with a sound knowl-
edge of the refrigeration and electrical systems.
1.4. PREREQUISITES SUPPLIED BY THE CUSTOMER
Provide a high sensitivity differential magnet circuit breaker switch (30
mA).
Provide a wall socket with earth of the type used in the country in which
the machine is operated.
Verify that the surface on which the machine rests is level.
In the case of water-cooled machines or with equipment with direct
humidity control, provide connection to a water system.
17 - EN
Publicidad
