Publicidad
Idiomas disponibles
Idiomas disponibles
EN - 26
To modify a parameter:
- press
;
- press
or
;
- press
again or do not operate.
To exit the procedure: press
When programming has been completed, interrupt the power supply to the instrument.
7.10.2 RESTORE THE DEFAULT VALUE OF THE CONFIGURATION PARAMETERS
With no procedure in progress by pressing
and act on the
Successively, insert a second password by pressing
Press
and act on the
succession allows to restore the default values.
Interrupt the instrument power supply after modification of the parameters.
Make sure that the default value of the parameters is appropriate, in particular, if the probes are the NTC type.
7.11. CONFIGURATION PARAMETERS
7.11.1 FIRST LEVEL CONFIGURATION PARAMETERS
PARAMETER
MIN.
r0
0,1
r1
1
r2
1
r 3
-99,0
r 4
-99,0
r 5
1
r 6
1
r 7
-99,0
r 8
-99,0
r 9
-99,0
r A
-99,0
7.11.2 SECOND LEVEL CONFIGURATION PARAMETERS
PARAMETER
MIN.
CA 1
-25,0
CA 2
-25,0
P0
0
P1
0
P 2
0
P3
0
PARAMETER
MIN.
r0
0,1
r 1
1
r 2
1
e
, or do not operate.
and
or
keys to set "743" and
or
keys to set "149" and
MAX.
M.U.
15,0
°C/°F (1)
600
min
600
min
99,0
°C/°F (1)
99,0
°C/°F (1)
600
min
600
min
99,0
°C/°F (1)
99,0
°C/°F (1)
99,0
°C/°F (1)
99,0
°C/°F (1)
MAX
M.U.
DEF.
25,0
°C/°F (1)
25,0
°C/°F (1)
1
...
1
...
1
...
1
...
MAX
M.U.
DEF.
15,0
°C/°F (1)
600
min
600
min
simultaneously and for a long period: the display shows "PA". Press
to confirm or do not operate.
and
simultaneously and for a long period: the display shows "dEF".
to confirm or do not operate. The use of both passwords in
DEF.
MAIN CONTROLLER
2,0
parameter r7, r8, r9 and rA differential
90
timed positive blast chilling duration
240
timed negative blast chilling duration
3,0
positive blast chill end-point temperature (temperature detected by the pin probe)
-18,0
negative blast chill end-point temperature (temperature detected by the pin probe)
90
set-temperature positive blast chilling maximum duration
240
set-temperature negative blast chilling maximum duration
-10,0
positive blast chilling operational setpoint (cabinet temperature)
-40,0
negative blast chilling operational setpoint (cabinet temperature)
2,0
post positive blast chill storage operational setpoint (cabinet temperature)
-20,0
post negative blast chill storage operational setpoint (cabinet temperature)
SENSOR INPUTS
0,0
cabinet probe offset
0,0
pin probe offset
0
probe type
0 = PTC
1
degree Celsius decimal point (for the quantity displayed during normal operation) 1 = YES
0
unit of temperature measurement (2)
1
pin probe enabling
MAIN CONTROLLER
2,0
parameter r7, r8, r9 and rA differential
90
timed positive blast chilling duration
240
timed negative blast chilling duration
1 = NTC
0 = °C
1 = °F
1 = YES
Publicidad
