Completing The Motor Installation - Kichler 300370 Manual De Instrucciones

COMPLETING THE MOTOR INSTALLATION

Step 1. Remove one of the two shoulder screws in the mounting bracket.
Loosen the second shoulder screw without fully removing it. (Fig. 17)
Step 2. Assemble canopy by rotating key slot in canopy over shoulder
screw in mounting bracket. Reinstall the shoulder screw that was previously
removed, then retighten two shoulder screws securely. (Fig. 18)
Step 3. Securely attach and tighten the canopy hole cover over the shoulder
screws in the mounting bracket utilizing the keyslot twist-lock feature.(Fig.19)
14 | KICHLER.COM
Mounting
Bracket
Canopy
Shoulder
Screw
Shoulder
Screw
Fig. 17
Fig. 19
Fig. 18