Installing The Light Plate - Kichler 300370 Manual De Instrucciones

INSTALLING THE LIGHT PLATE

Step 1. Remove the screw marked with a brown dot label on the mounting
plate and keep for later use. Loosen the other two (do not remove).(Fig.22)
Step 2. Place the two slot holes on the light plate over the 2 screws previously
loosened from the mounting plate. Rotate the light plate until it locks in
place at the narrow end of the key holes. Secure by tightening the 2 screws
previously loosened and the one previously removed. (Fig. 23)
16 | KICHLER.COM
Mounting Plate
Screw
Fig. 22
Light Plate
Fig. 23