Nemox GELATO NXT1 i-Green Instrucciones Para El Uso página 24

knob (C).
Check that there are no obstructions that
prevent blade rotation (including any bowl
deformation).
The combination of ingredients poured in at a
temperature below +5°C and pre-cooling
phase may prevent the blade from starting.
Turn off the machine for 10 minutes. Restart
the machine by pressing the Start button
twice (L.1) to skip the pre-cooling phase.
PROBLEM: The ice cream has become very
hard during the storage phase.
Tip: use a different storage cycle. Press the
L3 button until a cycle is activated that
includes
CERTIFIED
ISO 9001:2015
24
a lower density (corresponding to a smaller
LED lit on the DENSITY CONTROL bar).
PROBLEM: The ice cream tends to melt
during the storage phase.
Tip: use a different storage cycle. Press the
L3 button until a cycle is activated that
includes a higher density (corresponding to a
larger LED lit on the DENSITY CONTROL
bar).
The machine is noisy.
A certain level of noise falls within the normal
operating specifications. However, if it
becomes excessive, contact an authorised
Service Centre.
NEMOX International S.r.l.
Via E. Mattei, N° 14
25026 Pontevico
Brescia - ITALY
www.nemox.com