Installing The Thread Stand - JUKI LK-1941 Manual De Instrucciones

20130424 LK-1941,1942 R08
(14) Installing the eye protection cover
WARNING :
Be sure to attach this cover to protect the eyes from the disperse of needle breakage.

(15) Installing the thread stand

1
2
1
Be sure to install and use eye protection cover 1.
1) Assemble the thread stand, and set it in the
hole in the top right corner of the machine
table.
2) Tighten locknut 1 to fix the thread stand.
3) When ceiling wiring is possible, pass the power
cord through spool rest rod 2.
15