Connecting The Cords - JUKI LK-1941 Manual De Instrucciones

20130424 LK-1941,1942 R08

(10) Connecting the cords

Perform the connection of the cords as shown in the figure below.
Bundle CN2 and CN7 together with other cords using cable band B so that they do not come in contact
with Y feed shaft A.Pass the cords of J12, 14, 15, 59 and through the cord clamp A located on the upper side
of the inside of the control box and the cords of J17, 18 and (26 ) through the cord clamp B. Bundle J2, 8 and FG
using the cable band.
J17
B
J18
B
A
Bend the CN7, CN2 and FG
cords, and clamp them.
Clamp
FAN motor cord
1. Bend and clamp J17 and J18 cords as shown in the figure above.
2. Remove the fan motor cord from the clamp when opening the cover.
In addtion, wind the cord on the clamp when attaching the cover.
B
J97 : Wiper
A
B
FG
White
CN10(J4)
Black
J12
White
J14
Blue
J15
Red
J20
Yellow
J21
White
J22
Red
J44
Yellow
J59 J79
Gray
J17
White
J18
Gray
J23
CN7
CN2
J93 : Intermediste presser
(LK-1942 only)
J92 : Presser, left
J91 : Presser, right
P80
* LK-1941 is of 3-string
solenoid valve type
without intermediate
presser.
Connect J92, J91 and
J97.
J78
J79
Pressure switch
One-pedal
Operation box
11