Adjusting The Height Of The Intermediate Presser (For Lk-1942 Only); Adjusting The Intermediate Presser Stroke (For Lk-1942 Only) - JUKI LK-1941 Manual De Instrucciones

20130424 LK-1941,1942 R08

8. Adjusting the height of the intermediate presser (for LK-1942 only)

1

9. Adjusting the intermediate presser stroke (for LK-1942 only)

9-1. Adjusting the intermediate presser stroke to 4 to 10 mm
0.5 mm
2
A
1
B
1) Lower the intermediate presser 2. (Refer to "3.
Threading the machine head".)
2) Turn the handwheel to lower intermediate presser
2 to its lowest position.
3) Loosen setscrew 1 and adjust the height of
intermediate presser 2 so that the clearance
provided between the intermediate presser and the
cloth is approximately 0.5 mm.
1) Remove the machine arm side cover.
2) Loosen setscrew 1 and move it in the direction
of arrow for adjustment.
3) If moving in the direction of A, the stroke will be
decreased. (Min. 4 mm)
If moving in the direction of B, the stroke will be
increased. (Max. 10 mm)
The nut may be removed if setscrew
1 is excessively loosened. So, be
careful. Loosen setscrew 1 by a half
turn to properly adjust the stroke.
23