JUKI LK-1941 Manual De Instrucciones página 45

20130424 LK-1941,1942 R08
(2) Sewing operation
Operation example : After performing sewing with the contents of the registered P1, perform sewing with the
contents of P3.
P 1
P 3
1) Turn ON the power switch.
P 1
2) Press the
3) Press the
SEWING
up, the work clamp foot goes up after it has moved.
4) Check the contour of the sewing pattern.
(Refer to the item "Checking the contour of a sewing
pattern".)
5) If the contour of the sewing pattern is acceptable,
the sewing can be made.
6) After the completion of sewing, press the
Then the work clamp foot will move to the sewing
start point after the origin retrieval. (The P keys
can operate the pattern chage by one-touch even
when the sewing LED is lighting up.)
7) Perform the above items 4) and 5).
※ The P1 to P7 can be indicated on the display when
SEWING
selecting the pattern by pressing the
key.
→ 0 to 99 ←→ P1 to P7 ←
P1 to P7 which have not been registered are not
indicated.
key.
key, and when the sewing LED lights
P 3 key.
or
33