Operation Of The Sewing Machine (Basic); Item Data Setting; Turn On The Power Switch - JUKI LK-1941 Manual De Instrucciones

20130424 LK-1941,1942 R08

%. OPERATION OF THE SEWING MACHINE (BASIC)

1. Item data setting

Set each item following the procedure described below.
Setting of the
pattern No.

(1) Turn ON the power switch

Pattern No. of the item selection lights up, and the pattern No. is indicated on the data display.
(2) Setting of the pattern No.
Service pattern No.
Switch design on the control box may be different from each other in accordance with the
models.
Setting of the X
scale
Shape
□ 50x30 mm
P=3.0
P=3.0 ø30
P=3.0
P=3.5 ø30
S e w i n g c a n n o t b e
performed since this No. is
for the pattern for adjusting
the amount of oil in the hook.
(See P. 45.)
Setting of the
Setting of the Y
m a x . s e w i n g
scale
speed limitation
1) Press the
NO".
2) Press the
1 to 99 on the display.
In case the pattern is not prepared, indicate the service
pattern No. 51 to 53 inputted beforehand at the time of
delivery. For LK-1941, the intermediate presser is not
provided. Prepare the presser in accordance with the
sewing pattern.
Setting of the heat
cutter temperature
(For Z type only)
key to indicate the item "Pattern
or key to indicate Pattern No.
25