JUKI LK-1941 Manual De Instrucciones página 47

20130424 LK-1941,1942 R08
(2) Sewing operation
Operation example : Perform sewing with the contents of the registered C1.
1) Turn ON the power switch.
2) Set the pattern No. to "
key.
SEWING
Scroll as follows :
→ 0 to 99 ← → P1 to P7 ← → C1 to C3 ←
※ P1 to P7 and C1 to C3 which have not been
registered are not indicated.
3) Press the
up, the feeding frame will go up after having moved.
4) If the contour of the pattern is acceptable, the
sewing can be made.
5) Every time the sewing is finished, the step is made
according to the combination. After completing one
cycle of sewing, the step returns to the first step.
The sewing can be made repeatedly.
※ 1. When you desire to return the pattern to the
previous one or step to the next one during
sewing, press the
that the sewing LED lights up.
The indication of the pattern No. will change,
and the feeding frame will move to the sewing
start point.
※ 2. If the contents of P1 to P7 are changed after
registration of C1 to C3, the contents of P1 to
P7 used in C1 to C3 will change. So, be
careful.
※ 3. Make sure of the contour of the pattern for
each of the patterns.
(Refer to the item "%-2. Checking the
contour of a sewing pattern".)
" using the
key. When the sewing LED lights
or key in a state
or
35