Adjusting The Stitch Length; Changing The Needle Drop Position - Janome 385.8080200 Manual De Instrucciones

Adjusting the Stitch Length
Pressthe mode selectionkey_ to enter stitch
length adjustingmode.
The LED displayshows "2.2" (defaultsetting).
Pressthe Down (-') key to decrease stitch length.
Pressthe Up (+) key to increase stitch length.
The stitch lengthcan be varied from 0.0 to 5.0.
Reverse stitch length cannot be set longer than 2.5.
1.0
I
I
I
I
I
2.2 5.0
Changing the needle drop position
You can change the needle drop positionof straight
stitching,i.e. patterns#01-04 and #18-21
01 02 03 04 18 19 2g 2_
,, I_,_
Press the mode selection key _ to enter stitch
width adjusting mode.
The LED display shows "3.5" (default setting), which
represents the center needle position.
Press the Down (-) key to move the needle to the left.
Press the Up (+) key to move the needle to the right
Left needle position
(_ Center needle position
(_ Right needle position
0.0 3.5
®
7.0
®
3O