Quilting; Pin Tucking - Janome 385.8080200 Manual De Instrucciones

Quilting
Machine setting
O Pattern
(_ LED display
® Foot
(_ Quilting bar
01
I
d=
A: Zigzag foot
Loosen.the quilting bar screw on the back of the foot
holder and insert the quilting bar into the hole. Set the
quilting bar at the desired position and tighten the
screw to secure it.
Sew tracing the previous seam with the quilting bar to
keep constant seam spacing.
(_ Quilting bar screw
(_) Hole
® Quilting bar
Seam spacing
@
01
I
I
+
®
'-' I}
Li
®
®
t
Pin Tucking
Machine setting
(_ Pattern
(_ LED display
® Foot
O2
G: Blind hem foot
@ @ ®
02
€ LI ff
Fold the fabric with wrong side together.
Position the fabric so that the needle pierces 0.1-0.2
cm (1/16") inside of the folded edge, and lower the
foot.
Turn the guide screw and move the guide next to the
folded edge. Sew guiding the folded edge along the
guide.
Open the fabric and press the tucks to one side.
(_ Guide screw
(_ Guide
(_ Folded edge
72