Zipper Application; To Attach The Zipper Foot; Fabric Preparation; To Sew - Janome 385.8080200 Manual De Instrucciones

Zipper Application
Machine setting
O Pattern
® LED display
® Foot Ei Zipper foot
@ ® ®
01
['-' I ]
+ L!
To attach the zipper foot:
(1) Attach the zipper foot with the pin on the right,
when sewing on the left side of the zipper.
(2) Attach the zipper foot with the pin on the left, when
sewing on the right side of the zipper.
(_) Groove
@) Pin
Fabric preparation:
Add 1 cm (3/8") to the zipper size. This is the overall
opening size.
(_ Right side of the fabric
(_ 1 cm (3/8")
• (_ Opening size
(_ Zipper size
® Slider
® Zipper teeth
(_ Zipper tape
® Wrong side of the fabric
(_ End of the opening
Place the right sides of the fabric together and sew up
to the end of the zipper opening, with a 2 cm (13/16")
seam allowance. Reverse the stitch to fasten the
seam. Baste along the zipper opening with the stitch
. length 4.5
_) 2 cm (13/16")
(D Zipper opening (Basting)
@ Reverse stitches
(_ E.!3dof the opening
(_ Seam
NOTE:
Loosen the thread tension to one (1) for the basting
stitch.
(1) (2)
f
[]
To sew:
[] Fold up the upper seam allowance. Fold back the
bottom seam allowance to form a 0.3 cm (1/8")
fold. Place the zipper teeth next to the fold and pin
it in place.
O Bottom fabric
® End of the zipper opening
® Slider
(_ 0.3 cm (i/8")
O Wrong side of the upper fabric
O Opening size
® Fold
[]
®
®
6O