Hitecsa 117 Manual De Instalación, Uso Y Mantenimiento página 109

Clearance and positioning
1
a
e
2
c
Model 117
a mm 250
b mm 500
c mm 250
d mm 500
e mm 1500
f mm 800
Top view
800
IOM_EQUI PF-EQUHI PF_117a128_207983_200101_ES-EN-FR-DE-IT
f
b
1
d
124 128
250 250
500 500
250 250
500 500
1500 1500
800 800
440
840
400
Model
EQUI PF P0lPI0
EQUI PF P1
EQUHI PF P0lPI0 Kg
EQUHI PF P1
The weights refer to packed units without water.
KEAP accessory - remote controlled outdoor air probe
For correct shifting temperature adjustment of water coming out of the
heat pump, it is important that the air temperature has a significant
value and is not influenced by the incorrect position of the sensor/unit."
The unit is equipped with an outdoor air temperature sensor located
next to the fin-packed heat exchanger.
If the unit is installed facing the sun and outdoor air temperature reading
is therefore altered, it is possible to connect the KEAP remote control
outdoor air probe accessory. This requires the following operation:
- purchase the KEAP accessory
- disconnect the outdoor air probe from the board and connect
the remote control sensor to the same clamps, following the
relative instructions on the instruction sheet.
KRMA – Flow anti-vibrating fitting.
1
KRAS – Intake duct fitting
2
111
Weights
117 124 128
Kg 260 260 280
Kg 260 260 280
275 285 295
Kg 275 285 295