Hitecsa 117 Manual De Instalación, Uso Y Mantenimiento página 95

Table "A": Technical Data
EQUHI PF model
Fan coil application
Cooling capacity MIN/NOM/MAX (1)
Nominal cooling capacity (1) (*) EN 14511:2013
EER EN 14511:2013 (1) (*)
ESEER EN 14511:2013
Heating capacity MIN/NOM/MAX (2)
Nominal heating capacity (2) (*) EN 14511:2013
COP EN 14511:2013 (2) (*)
Application radiant
Cooling capacity MIN/NOM/MAX (3)
Nominal cooling capacity (3) (*) EN 14511:2013
EER EN 14511:2013 (3)
Heating capacity MIN/NOM/MAX (4)
Nominal heating capacity (4) (*) EN 14511:2013
COP EN 14511:2013 (4) (*)
Sound pressure (5)
Sound power (6)
Machine body sound power
Scroll compressor
Fans
Fan nominal air flow
Available static head
Maximum available static head
Heat exchanger water content
Water storage tank content
Heat exchanger nominal flow water side (1)
Residual head (P0/ASP0 installation) (1)
Residual head (PI0/ASPI0 installation) (1)
Residual head (P1/ASP1 mounting) (1)
Amount of R410A refrigerant
Amount of Oil PVE
Electrical data
Absorbed power in summer mode NOM (1) (●)
Absorbed power in winter mode NOM (2) (●)
Absorbed power in summer mode NOM (3) (●)
Absorbed power in winter mode NOM (4) (●)
Pump absorbed power (P0/PI0-ASP0/ASPI0)
Pump absorbed power (P1/ASP1)
Electrical power supply
Auxiliary power supply
Nominal current
Maximum current (■)
Pump absorbed current (P0/PI0-ASP0/ASPI0)
Pump absorbed current (P1/ASP1)
Dimensions
Width P0/PI0/P1
Width ASP0/ASPI0/ASP1
Height P0/PI0/P1
Height ASP0/ASPI0/ASP1
Depth P0/PI0/P1
Depth ASP0/ASPI0/ASP1
Water connections
(*) Under the following conditions: condenser
inlet air temperature 35°C; chilled water
temperature 7°C; temperature differential at
evaporator 5°C.
(2) In the following conditions: evaporator inlet
air temperature 7°C B.S., 6°C B.U.; hot water
temperature 45°C; temperature differential at
evaporator 5°C.
(3) Under the following conditions: condenser
inlet air temperature 35°C; chilled water
temperature 18°C; temperature differential at
evaporator 5°C.
(4) In the following conditions: evaporator inlet
air temperature 7°C B.S., 6°C B.U.; hot water
temperature 35°C; temperature differential at
evaporator 5°C.
IOM_EQUI PF-EQUHI PF_117a128_207983_200101_ES-EN-FR-DE-IT
(5) Sound pressure level in dB(A) referring to a
5 m distance from the unit, in directionality
factor equal to Q=2.
(6) Sound power level in dB(A) on the basis of
measurements taken in accordance with UNI
EN-ISO 9614 and Eurovent 8/1 Standards.
(■) Current drawn by the compressor and fans.
(●) Power absorbed by the compressor and
fans.
(*) The data according to EN14511 refer
staging P0/PI0/ASP0/ASPI0. Refer to the
section "Attachments Technical Note" to the
data of the establishment P1/ASP1.
97
117
kW 8,3/16/17 12/23,5/24,8
kW 16,2
2,98
4,26
kW 6,8/18,0/19,1 10,1/24,6/27,2
kW 17,7
3,32
kW 11/20,1/21,2 14,5/27,5/29,3 15,7/31,7/32,6
kW 20,3
3,86
kW 7,5/19,1/20,1 9,7/25,3/27,9 10,2/29,4/31,6
kW 18,8
4,10
dB(A) 53
dB(A) 77
dB(A) 68
Scroll regulated by inverter
n° x kW 1x0,814
m3/h 7600
Pa 80
Pa 800
l 1,5
l 110
l/h 2800
kPa 89/87
kPa 89/87
kPa 148/146
3,05
kW 5,6
kW 5,5
kW 5,4
kW 4,8
kW 0,3
kW 0,6
V-ph-Hz 400-3+N-50
V-ph-Hz
A 10,91
A 19,2
A 1,37
A 2,72
mm 1522
mm 1625
mm 1280
mm 1590
mm 835
mm 845
1 ½"
Ø
ESEER (European Sesonal EER) European
average seasonal efficiency.
ESEER+ with AdaptiveFunction Plus logic.
124 128
12,8/26,7/27,8
23,8 27,0
2,84 2,91
4,32 4,37
10,7/28,8/31
24,3 28,5
3,25 3,21
27,8 32,0
3,88 3,81
25,0 29,1
4,10 4,00
53 56
77 80
68 71
1x0,814 1x1,02
7600 8640
80 80
800 800
1,9 1,9
110 110
4000 4600
89/84 76/69
89/84 76/69
116/111 126/119
4,05 4,6
1,6
8,6 9,5
7,7 9,1
7,4 8,6
6,3 7,5
0,3 0,3
0,6 0,6
230-1-50
14,92 16,77
27,4 27,4
1,37 1,37
2,72 1,58
1522 1522
1625 1625
1280 1280
1590 1590
835 835
845 845
1 ½" 1 ½"