Hitecsa 117 Manual De Instalación, Uso Y Mantenimiento página 111

Clearance and positioning
a
e
c
Model 117
a mm 250
b mm 500
c mm 250
d mm 500
e mm 1500
f mm 800
Top view
800
IOM_EQUI PF-EQUHI PF_117a128_207983_200101_ES-EN-FR-DE-IT
f
b
d
124 128
250 250
500 500
250 250
500 500
1500 1500
800 800
440
840
400
Model
EQUI PF
ASP0lASPI0
EQUI PF ASP1
EQUHI PF ASP0lASPI0 Kg
EQUHI PF ASP1
The weights refer to packed units without water.
KEAP accessory - remote controlled outdoor air probe
For correct shifting temperature adjustment of water coming out of the
heat pump, it is important that the air temperature has a significant
value and is not influenced by the incorrect position of the sensor/unit."
The unit is equipped with an outdoor air temperature sensor located
next to the fin-packed heat exchanger.
If the unit is installed facing the sun and outdoor air temperature reading
is therefore altered, it is possible to connect the KEAP remote control
outdoor air probe accessory. This requires the following operation:
- purchase the KEAP accessory
- disconnect the outdoor air probe from the board and connect
the remote control sensor to the same clamps, following the
relative instructions on the instruction sheet.
113
Weights
117 124 128
Kg 430 430 450
Kg 430 430 450
445 455 465
Kg 445 455 465