Grundfos CU 362 Instrucciones De Instalación Y Funcionamiento página 20

6.3.2 Configuration by PC Tool
For the physical connection between the PC and Dedicated Controls (CU 362), a USB cable is used.
Configuration by PC Tools
Pos. Description
1 PC
2 USB cable
3 CU 362
Load the PC Tool WW Controls, and configure the system direct on line, or upload a prepared configuration file to the CU 362.
When the system has been set up by use of PC Tools, switch on the power supply to the pump groups and protective devices of all
pumps. We recommend to set the Auto/On/Off switch to position "Auto". See fig.
If the Auto/On/Off switch is set to position "On", the Dedicated Controls system cannot be set or managed by the SCADA system.
Auto/On/Off switch
20
1
2 3
Auto/On/Off switch.