Grundfos CU 362 Instrucciones De Instalación Y Funcionamiento página 25

For further information, see Dedicated Controls, Software
description installation and operating instructions.
6.4.5 Counter inputs
The counter input to be set is selected in this display.
A counter input can connect to a flowmeter or energy meter.
As standard, there are two counter inputs. Each counter can be set
via a submenu.
Path:Settings > I/O settings > Counter inputs >
Counter inputs
Counter inputs, configuration
The selected counter input is set in this display.
1. Identify the digital input connected to a flowmeter in the system.
2. Select the digital input the flowmeter is connected to, unit and
scaling.
The IO 351B pulse input has a maximum frequency of 12
Hz.
For further information, see Dedicated Controls, Software
description installation and operating instructions.
Path:Settings > I/O settings > Counter inputs > Flowmeter >
Flowmeter
6.5 Electrical overview
This display shows an overview of the various inputs and outputs.
The submenus in this display are described in the following
sections.
Path:Status > Electrical overview >
Electrical overview
25