Publicidad
Idiomas disponibles
Idiomas disponibles
TRAFIK/N
Index
1
Product Description
2
Technical data
3
Installation and Assembly
4
Electrical Connections
5
Start-up
1 PRODUCT DESCRIPTION
Models and package contents
The name TRAFIK/N is used to identify a family of electromechanical barriers designed to manage passages up to 6 meters. All
motorized models, involve the use of a NET-M230-I inverter module combined with advanced DEA System control units (EVO series)
equipped with an anti-crushing sensor, built-in 433 Mhz radio receiver, speed adjustment and slowing down on opening and closing.
TRAFIK/N is intended primarily for intensive use and areas of high vehicular passage.
TRAFIK/N is sold without the balancing spring, foundation base, rod and its fi xing omega. Missing components will have to be purchased
separately depending on the width of the transit area, work cycle and installation area that is planned for the automaton.
Complementary accessories are given in the table "PRODUCT ACCESSORIES" (p. 101).
TRAFIK/N series vehicular barriers are composed of an electromechanical gear motor that sets the boom in direct rotation, while
balancing is entrusted to a compression spring.
The automation is enclosed in a treated and painted sheet metal (or stainless steel) case equipped with a lockable door. The control
panel, on the other hand, is placed inside the upper metal cover.
Transport
TRAFIK/N barriers are always supplied packaged in boxes that provide adequate protection for the product; however, pay attention to
any directions that may be provided on the box for storage and handling.
Each single part and the machine body packed must be transported as close as possible to the place foreseen for installation. This
must have been preliminarily checked as regards the dimensions and the necessary spaces, including those indispensable for the
installation manoeuvres.
2 TECHNICAL DATA
Mains supply voltage (V)
Motor power supply voltage (V)
Maximum power absorption (W)
N. max cycles in 24h.
MCBF (Mean Cycles Between Failures)
Operating temperature (°C)
90° Opening time (s)
Type of boom that can be used
Weight with packing (Kg)
Sound pressure (dBA)
Protection level
Vehicular electromechanical barrier
Operating instructions and warnings
6
13
Maintenance
7
13
Product Disposal
14
15
19
4м (ст. BOOM/4)
230-240 V ~ (50/60 Hz)
230 V 3~
250
15.000
3.500.000 cycles
-20 ÷ 45 °C
1,5 ÷ 4
Refer to Table p. 100
< 70
IP54
6м (ст. BOOM/6)
4.000
4 ÷ 7
70
TRAFIK/N
19
20
13
Publicidad
