GRAPHITE 58G904 Manual página 13

Lack of Is the DC circuit
electricity in protection switch
DC sockets on
The equipment
connected to the
generator is
faulty
If the generator still does not show voltage
at the DC sockets, contact your dealer or
service centre
TRANSPORT / STORAGE
• When transporting the generator, switch off the engine switch and fuel
valve.
• Keep the generator level to prevent fuel spillage. Fuel vapour or spilled
fuel can catch fire.
• Contact with a hot engine or exhaust system can cause serious burns
or fire. Allow the engine to cool before transporting or storing the
generator.
• Take care not to drop or bump the generator during transport. Do not
place heavy objects on the generator.
Before storing the device for an extended period of time:
Ensure that the storage area is free from excessive moisture and dust.
STORAGE TIME
Less than 1
month
1 to 2 months
2 months to 1 year
1 year or more
*Use petrol conditioners that have been formulated to extend shelf
life.
Service in accordance with the table below.
TECHNICAL DATA
Rated data
Parameter
Engine capacity
Output voltage
Output frequency
Output power
Peak output power
Additional output voltage
Power of additional output
Degree of protection
Protection class
Switch on DC
protection
Check that the
appliance or electrical
equipment has no
defects
RECOMMENDED SERVICE
PROCEDURE
TO PREVENT HARD STARTING
No preparation required.
Fill with fresh petrol and add petrol
conditioner.
Fill with fresh petrol and add petrol
conditioner.
Drain the float bowl of the carburettor.
Empty the fuel sediment reservoir.
Fill with fresh petrol and add petrol
conditioner.
Drain the float bowl of the carburettor.
Empty the fuel deposit tank.
Remove the spark plug. Pour a
tablespoon of engine oil into the cylinder
.
Turn the engine slowly using the cable to
distribute the oil.
Reinstall the spark plug.
Change the engine oil.
When collected from storage - drain the
stored petrol into suitable containers for
disposal.
and fill with fresh petrol before starting.
Value
196 cm3
230 V AC
50 Hz
2000 W
2200 W
12V DC
8,3A
IP23M
I
Idle speed
Internal combustion engine power
Performance class
Power factor (cos φ)
Type of fuel
Fuel tank capacity
Average fuel consumption
Engine oil type
Oil quantity for
combustion engine
Spark plug type
Maximum ambient temperature
Dimensions LxWxH
Mass
Year of production
58G904 stands for both type and machine designation
NOISE AND VIBRATION DATA
Sound pressure level
Sound power level
Information on noise and vibration
The noise emission level of the equipment is described by: the emitted
sound pressure level Lp and the sound power level Lw
A
measurement uncertainty). The vibrations emitted by the equipment are
described by the vibration acceleration value a
measurement uncertainty).
The sound pressure level Lp
vibration acceleration value a
measured in accordance with ISO 8528-10:1998. The vibration level a
given can be used to compare equipment and to make a preliminary
assessment of vibration exposure.
The vibration level quoted is only representative of the basic use of the
unit. If the unit is used for other applications or with other work tools, the
vibration level may change. A higher vibration level will be influenced by
insufficient or too infrequent maintenance of the unit. The reasons given
above may result in increased vibration exposure during the entire working
period.
In order to accurately estimate vibration exposure, it is necessary to
take into account periods when the unit is switched off or when it is
switched on but not used for work. Once all factors have been
accurately estimated, the total vibration exposure may turn out to be
much lower.
In order to protect the user from the effects of vibration, additional safety
measures should be implemented, such as cyclical maintenance of the
machine and working tools, securing an adequate hand temperature and
proper work organisation.
ENVIRONMENTAL PROTECTION
Electrically-powered products should not be disposed of with household
waste, but should be taken to appropriate facilities for disposal. Contact
your product dealer or local authority for information on disposal. Waste
electrical and electronic equipment contains environmentally inert
substances. Equipment that is not recycled poses a potential risk to the
environment and human health.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with its
registered office in Warsaw, ul. Pograniczna 2/4 (hereinafter: "Grupa Topex") informs that
all copyrights to the content of this manual (hereinafter: "Manual"), including, among
others. Its text, photographs, diagrams, drawings, as well as its composition, belong
exclusively to Grupa Topex and are subject to legal protection under the Act of 4 February
1994 on Copyright and Related Rights (ie Journal of Laws 2006 No. 90 Poz. 631, as
amended). Copying, processing, publishing, modification for commercial purposes of the
entire Manual and its individual elements, without the consent of Grupa Topex expressed
in writing, is strictly prohibited and may result in civil and criminal liability.
EC Declaration of Conformity
Manufacturer: Grupa Topex Sp. z o.o. Sp.k., Pograniczna 2/4 02-285
Warszawa
Product: Generator set
Model: 58G904
Trade name: GRAPHITE
13
3000 min-1
6.5 HP
G1
1.0
#92; #95; #98
15 L
2.44l/h
SAE15W30
the internal 0,6 L
Magneto ignition
+ 40°C
60.5x44.5x45.5 cm
41 kg
2023
Lp = 65 dB(A) K= 3 dB(A)
A
Lw = 95 dB(A) K= 3 dB(A)
A
A
(where K is the
h
, the sound power level Lw
A
given in these instructions have been
h
(where K denotes
and the
A
h