Publicidad
13
fill
B{?
iiii; ili
CONNECTION
Analog signals can be input to this unit.
When an LD player without digital out terminals,
VCR for playback,
turntable,
etc, is connected
to this unit, the incoming sound from it
can be played or recorded
on this unit.
Before operation, connect the external equipment using the optional
connection
cord with Phono plug.
Connect the red plug to the R jack, and the white plug
to the L jack of the VI DEO/AUX jack. _ See illustration
13.
Connecting a turntable
Use a turntable with an equalizer amplifier (Aiwa PX-E900, PX-
E800, etc).
POWER
_-_
@
@
1
1
VIDEO/AUX
LISTENING T OOTHER SOURCES
After connecting, carry out the following steps to listen to the
source. --, See illustration [].
1 Press the VIDEO/AUX button.
"VIDEO" is displayed,
2 Play the external source.
Refer to the operating instructions of the connected equip-
ment.
To change a source name in the display
The source name in the display can be changed to VIDEO, AUX,
or TV, according to the connected equipment.
To select a source name, carry out the following steps.
1
Press the POWER button to turn off the power.
2
Press the POWER
button
while
pressing
the VIDEO/AUX
button.
Repeat these steps until the desired
source is displayed.
3O
Publicidad
