Publicidad
AI EDIT RECORDING
¢iiiiii
iiiii!iiil
EDIT
B
(_)
SHIFT
EDIT
I_1_DOWN
UPI_1
5
To stop recording
in the middle
Press the •
/ _ button on deck 1 to stop the deck, and press the
•
button.
To clear the editing contents
Press the • CLEAR buttontwice in the stop mode so that the red
line surrounding"AI EDIT" in the displaygoes out, or pressthe
OPEN/CLOSE button.
To check
the editing
contents
-* See Illustration
[].
Before recording, press the EDIT button.
Each time it is pressed, the contents of each side of the tape are
displayed in turn.
When using the remote control
Press the EDIT button while pressing the SHIFT button.
O Remaining
time of tape to be recorded
on
Tape side
(_ Total number of programmed
tracks
(_ Programmed
track numbers
To check the order of the programmed track numbers
See Illustration [].
Before recording, press the
_.=,. UP or .<.9 DOWN button
repeatedly.
Each time it is pressed, the track number and programmed number
are displayed in order.
_) Order of the tracks to be played
Track number
(_ Programmed
track numbers
To add tracks
to the edited
contents
If the remaining time is enough to record some tracks in step 4, you
can add tracks before recording
starts.
1
Press the EDIT button on the main unit, or while pressing
the
SHIFT button, press the EDIT button on the remote control to
select side A or B.
2
Press the numeric buttons to select tracks.
If the playing time of a selected
track is longer than the tape
remaining time, it is not added.
Time on cassette
tapes
and editing
time
The total playing time of the edited tracks may be a little longer than
the specified
tape recording
time, because cassette
tapes gener-
ally have a bit more tape than the time indicated
on their labels.
In this case, the excess time (without the minus mark) is displayed
instead of the remaining
time (with the minus mark) after editing.
38
Publicidad
