Publicidad
....
BASIC RECORDING
1
2
3
2
1
3
...... II
_i
/I
S
TUNER/BAND
I
VIDEO/AUX
i
I
CD
i
I
RECORDING
FROM
A CD,
RADIO
OR
CONNECTED
EQUIPMENT
Preparation
• Wind up the tape to the point recording starts.
• Note that recording is done on onlyone side of the tape.
• Use only normal (type ]) tapes.
Insert the tape to be recorded
on into deck I and
push the cassette
holder to close it.
Press the • / A button to open the cassette holder.
Insertthetape with the side to berecordedonfacing youand the
exposed side down.
2 Get ready for the source to be recorded.
To record from a CD
Press the CD button and load a disc.
To record
from a radio
broadcast
Press the TUNER button and tune in to a station.
To record from the connected
source
Press the VIDEO/AUX
button and play it.
3 Press the • button to start recording.
The I_ button is depressed
simultaneously.
When
recording
from
a CD,
playing
and
recording
start
simultaneously
with the first track.
To stop recording
Press the • / _ button.
To pause recording
(when recording from radio or connected equipment only)
Press the IIII button.
To resume recording,press it again.
To record selected tracks of the CD
Before pressing the • button, programthe tracks (see page 22).
To record
part of the CD
When the • button is pressed, recording always starts from the first
track.
To start in the middle of a track, play the CD first and press
the II button for CD at the point you wish to start recording
from.
Then, press the •
button.
The pause mode
for CD button
is
released automatically
and recording
starts.
To erase
a recording
A previous
recording is erased when a new recording is made on
that part of that tape.
1
Insert the tape you want to erase into deck 1.
2
Press the TAPE button.
3
Wind up the tape to the point where the erasure is to be started.
4
Press the •
button on deck 1 to start erasure.
32
Publicidad
