Publicidad
1
SHIFT
SLEEP
d
2
DOWN
UPII_,.I
SLEEP TIMERSETrlNG
When the sleep timer is used, the power is automatically
turned off
after the specified
time has elapsed.
You can also carry out the following
steps while the power is off.
While pressing the SHIFT button, press the SLEEP
button on the remote control.
"SLEEP" (_), (_) and "60" (_) are displayed.
"SLEEP"
0 goes out
in 4 seconds,
and the sleep timer starts to work. If you wish to
change this time, go to step 2 before "SLEEP"
_) goes out.
Press the .<._ DOWN or _._ UP button to specify
the time until the power is turned off.
Each time it is pressed, the time changes
between
240 and 10
minutes
in lO-minute
steps.
Specified
time (_) is displayed.
To change the time
Carry out steps 1 and 2.
To check the remaining
time until the power
is turned
off
While pressing the SHIFT button, press the SLEEP button once,
The remaining
time is displayed
for 4 seconds.
To cancel the sleep timer mode
While pressing the SHIFT button, press the SLEEP button twice so
that "SLEEP" in the display goes out.
44
Publicidad
