Publicidad
Idiomas disponibles
Idiomas disponibles
counterclockwise to decrease temperature, both possible by
increments of 5°F. If you wish to select a different preset, press a 3rd
time to go back to preset selection.
Got your time and temp set? Press Start/Stop to begin the cooking
process. The selected program will blink to indicate the unit is
preheating under the chosen programming. The preset light will blink
until the chosen temperature has been reached, and then remain
steady to indicate the unit is ready. The fan icon will turn on as well if
the program you have selected uses a fan for its cooking process.
Need to adjust? Change time or temperature settings with ease at any
point during the cooking process. All you need to do is press the
selector dial once (1) for time adjustments and twice (2) for
temperature adjustments. Press again a 3rd time to confirm, or unit will
automatically adjust to new time and/or temperature after 3 seconds.
All done? MAXX is equipped with both an automatic and manual
stopping function.
In automatic stop, once the cooking time has elapsed (0:00), MAXX will
beep three (3) times and enter "Off" mode (display will show "OFF
OFF"). The inner fan will continue to work for 3 minutes to help the unit
cool down if the selected mode used the fan (AIR FRY), and all lights
other than "START/STOP" will turn off. The side cooling fans will turn in all
modes to assist with the cooling process.
To turn off MAXX manually, press the Start / Stop button once and the
machine will enter "Off" mode as described above.
If the unit is in the process of entering "Off" mode in either way, you
can re-enter Standby mode during the 3 minutes of cooling process by
pressing Start / Stop. After three minutes, the unit will emit a single beep
to tell you the cooling process is finished.
Notes:
www.KALORIK.com
AFO 52484 - 200605
13
Publicidad
