Publicidad
Idiomas disponibles
Idiomas disponibles
12
SAFETY
This section contains information and important notes on safe commissioning and handling of
the machine.
For your personal safety, please read these operating instructions carefully before
commissioning. This will enable you to handle the machine safely and prevent
misunderstandings as well as personal injury and damage to property. Also observe
the symbols and pictograms used on the machine as well as the safety and danger
information!
12.1
Intended use of the machine
The machine is intended exclusively for the following activities:
Longitudinal and cross-cutting of wood and materials with similar physical properties to wood,
using an effective dust collection system according to technical specifications and within
technical limits of the machine.
HOLZMANN MASCHINEN GmbH assumes no responsibility or warranty for any other
use or use beyond this and for any resulting damage to property or injury.
12.1.1
Technical Restrictions
The machine is intended for use under the following ambient conditions:
Rel. Humidity:
Temperature (operational)
Temperature (Storage, Transport)
12.1.2
Prohibited Use / Forseeable Misuse
-
Operation of the machine without adequate physical and mental aptitude.
-
Operating the machine without knowledge of the operating instructions.
-
Changes in the design of the machine.
-
Operating the machine in a potentially explosive environment (machine can generate
ignition sparks during operation)-
-
Operation of the machine in closed rooms without chip and dust extraction (a normal
household vacuum cleaner is not suitable as an extraction device).
-
Operating the machine outside the limits specified in this manual.
-
Remove the safety markings attached to the product.
-
Modify, circumvent or disable the safety devices of the machine.
-
Cutting of materials with dimensions outside the limits specified in this manual.
-
Use of tools which do not meet the safety requirements of the standard for machine
tools for woodworking (EN847-1).
The improper use or disregard of the versions and instructions described in this manual will result
in the voiding of all warranty and compensation claims against Holzmann Maschinen GmbH.
12.2
User requirements
The machine is designed for operation by one person. The physical and mental aptitude as well
as knowledge and understanding of the operating instructions are prerequisites for operating
the machine. Persons who, because of their physical, sensory or mental abilities or their
inexperience or ignorance, are unable to operate the machinery safely must not use it without
the supervision or instruction by a responsible person.
Basic knowledge of woodworking especially the correlation of wood type, blade, cutting feed
and speeds.
Please note that local laws and regulations may determine the minimum age of the operator and
restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified electrician or
under the instruction and supervision of a qualified electrician.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
N O TE
max. 65 %
+5° C bis +40° C
-20° C bis +55° C
SAFETY
40
TS200 | TS250
Publicidad
