Publicidad
Idiomas disponibles
Idiomas disponibles
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
• This measured distance must also be
readable on the ruler (3).
• Then tighten the nuts (4) on the brackets
again to fix the guide rail.
11.
Assembly table extension
• Loosen the screws (1) at the table extension
(2) so far that they can be inserted into the T-
slot (3) of the guide profiles on the left and
right.
• Push the first table extension (2) to the main
table (4).
• Mount the second table extension (5) as
described above.
• Retighten the screws (1) of the two table
extensions.
17. Assembly rip fence
• Loosen the fixin screws (2) oft he bracket (3)
and insert the rip fence (1).
NOTE:
2 possible positions.
Position A: for straight cuts
Position B: for angle cuts
• Fix the rip fence in desired position with the
fixing
ASSEMBLY
50
TS200 | TS250
Publicidad
