Publicidad
Idiomas disponibles
Idiomas disponibles
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, your common sense and appropriate technical
suitability/training are and remain the most important safety factor for the fault-free operation of
the machine. Safe working depends first and foremost on you!
13
TRANSPORT
Damaged or insufficiently strong hoists and load slings can cause serious injuries or
even death. Always check hoists and load slings for sufficient load-bearing capacity
and that they are free of obstacles, fasten the loads carefully and never stand under
suspended loads.
To ensure proper transport, also observe the instructions and information on the transport
packaging regarding centre of gravity, attachment points, weight, means of transport to be used
and the prescribed transport position, etc..
If you transport the machine with a vehicle, make sure that the load is adequately secured!
NOTICE:
To transport the machine, you need a forklift truck with the appropriate load capacity
and a fork of at least 1200 mm length. The fork of the truck should be positioned under the
machine.
After the machine has been assembled, it can be transported for short distances with the
transport device or transported by crane or forklift truck using belts of appropriate load capacity
and length.
NOTICE:
Do not carry the machine at the work tables, these are not designed to withstand the
tensile load of the machine weight.
14
ASSEMBLY
14.1
Checking scope of supply
Always note visible transport damages on the delivery note and check the machine
immediately after unpacking for transport damage or missing or damaged parts. Report any
damage to the machine or missing parts immediately to your retailer or freight forwarder.
14.2
The workplace
Choose a suitable place for the machine.
Pay attention to the safety requirements and the dimensions of the machine.
The selected location must ensure a suitable connection to the electrical supply as well as the
possibility of connection to an extraction system. Make sure that the machine is placed on a solid
and level surface and that the ground can support the load of the machine. The machine must
be levelled at all support points. It is also necessary to guarantee a distance of at least 0.8 m
around the machine. In front of and behind the machine, the necessary distance must be
provided for the feeding of long workpieces.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
C AU TI O N
N O TI C E
WAR N I N G
Transport the machine in its packaging to
the installation site. To manoeuvre the
machine in the packaging, a pallet truck or
a forklift with appropriate lifting power can
be used.
TRANSPORT
43
TS200 | TS250
Publicidad
