Technical Specifications - Carel humiSteam Serie Manual Del Usuario

Model
steam
connection (diam. mm) 208-230 V
400-460-575 V
outlet pressure limits (Pa)
supply water
connection
temperature limits (°C)
pressure limits (MPa)
hardness limits (°fH)
instant flow-rate (l/min)
conductivity range (µS/cm)
drain water
connection (diam. mm)
typical temperature (°C)
instant flow-rate (l/min)
environmental conditions
ambient operating temperature (°C)
ambient operating humidity (% rH)
storage temperature (°C)
storage humidity (% rH)
index of protection
electronic controller
type
auxiliary voltage / frequency (V - Hz)
maximum auxiliary power (VA)
probes inputs for versions C and P
(general characteristics)
probe inputs for versions H and T
(general characteristics)
power to active probes for versions H or T
(general characteristics)
alarm relay outputs for versions H or T
(general characteristics)
alarm relay and dehum. outputs for vers. H or T
(general characteristics)
remote enabling input (general characteristics)
serial communication for versions H or T
power
rated power supply voltage: 208V - 1~N code U
instant steam production (1) (kg/h)
power input at rated voltage (kW)
rated power supply voltage: 230V - 1~N code D
instant steam production (1) (kg/h)
power input at rated voltage (kW)
rated power supply voltage: 208V - 3~ code W
instant steam production (1) (kg/h)
power input at rated voltage (kW)
rated power supply voltage: 230V - 3~ code K
instant steam production (1) (kg/h)
power input at rated voltage (kW)
rated power supply voltage: 400V - 3~ code L
instant steam production (1) (kg/h)
power input at rated voltage (kW)
rated power supply voltage: 460V - 3~ code M
instant steam production (1) (kg/h)
power input at rated voltage (kW)
rated power supply voltage: 208V - 1~N code U
instant steam production (1) (kg/h)
power input at rated voltage (kW)
* single-phase, ** three-phase.
(1) the average steam production is affected by factors such as: the ambient temperature, the quality of the water and the steam distribution system
UE001* UE003* UE003** UE005* UE005** UE008** UE009* UE010** UE015** UE025** UE035** UE045** UE065**
22/30
22/30
0 - 2000
0,6
input impedance: 15k Ω , range 0-10 Vdc
selectable by signal: 0 to 1 Vdc, 0 to 10 Vdc, 2 to 10 Vdc, 0 to 20 mA, 4 to 20 mA
input impedance: 60 k Ω with signals: 0 to 1 Vdc, 0 to 10 Vdc, 2 to 10 Vdc
28 V (24Vac rectified), Imax= 250 mA
250 V 5A (2A) - microinterruption action type 1C
250 V 8A (2A) - microinterruption action type 1C
free contact; max. resistance 50 Ω ; Vmax= 24 Vdc; Imax= 5 mA
1.5 3.0 5.0
1.12 2.25 3.75
1.5 3.0 5.0
1.12 2.25 3.75
3.0
2.25
3.0
2.25
3.0
2.25
3.0
2.25
3.0
2.25

12. TECHNICAL SPECIFICATIONS

30
30
0 - 1600 0 - 1700
/ "G
3
4
1 to 40
0.1 to 0.8 (1 to 8 bar)
≤ 40
1.2
125 - 1250
40
≤ 100
5
1 to 40
10 to 60
-10 to 70
5 to 95
IP20
UES-UEP-UEH-UEA
24 / 50-60
30
50 Ω with signals: 0- to 20 mA, 4 to 20 mA
12 Vdc 5%, Imax= 50 mA
RS-485 two-wire
8,7
6,52
9
6,75
5.0 8.0 10.0
3.75 6.00 7.50
5.0 8.0 10.0
3.75 6.00 7.50
5.0 8.0 10.0
3.75 6.00 7.50
5.0 8.0 10.0
3.75 6.00 7.50
5.0 8.0 10.0
3.75 6.00 7.50
76
2x40
1x40
0 - 2300
4
22,5
40
15.0 25 35 45
11.25 18.75 26.25 33.75
15.0 25 35 45
11.25 18.75 26.25 33.75
15.0 25 35 45
11.25 18.75 26.25 33.75
15.0 25 35 45
11.25 18.75 26.25 33.75
15.0 25 35 45
11.25 18.75 26.25 33.75
humiSteam - cod. +030221914 rel. 5.2 - 07.11.2005
2x40
7
65
48.75
65
48.75
65
48.75
Tab. 12.1