Fri-Jado TDR Serie Modo De Empleo página 63

4. Install the new lamp (230 V – 500 W). First press one side of the lamp into the lamp
holder (A). Press lamp in its correct position (B) and use its spring pressure to make
contact with the other terminal (see figure 5.1b ).
5. Make sure the lamp is correctly clamped between the two terminals (C). If this is not
the case, the lamp can move freely along its length-direction, until it is fixed into its
terminals (see figure 5.1b).
Do not touch the lamps with bare hands.
The fluid of your hands will substantially shorten the life time of the lamps. For replacing the
lamps, use gloves, a clean cloth or paper tissue to pick up an hold the lamps.
5.1.2. A noisy fan
Malfunction : fan is noisy
Solution : clean fan grid, fan plate and fan blades.
Noise in the fan can be caused by a polluted fan plate and/or polluted fan blades.
Clean the fan plate and fan blades as described in paragraph 4.2.
TDR 5 / TDR 8 / TDR 5+5 / TDR 8+8
www.frijado.com
9123827 / 1007
31