Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY
NOTE: Only applies to electrical appliances.
► Source of hazard: electric power
Hazard
Risk of electric
shock caused by
live components
Risk of electric
shock caused by
live parts
3269860_ut_GB_rev.2
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
• On the appliance and on
the adjacent metal parts
• On the appliance and
on the adjacent metal
accessories
Countermeasures
• Operations to the electric
system may be carried out
by authorised and quali-
fi ed staff only, in accordan-
ce with the relevant appli-
cable laws.
• Specialist procedure
• Comply with the correct
installation requirements
as per section "Installing
the appliance" of the in-
stallation manual.
• Disable the power supply
before removing the pro-
tections
• Prevent
the
appliance
from being powered acci-
dentally.
• Ensure that there is no vol-
tage
• Before commissioning the
appliance, check that all
electric connections are
not damaged
• Use a power supply cable
with
the
specifi cations
indicated in section "Elec-
trical connection" of the
installation manual.
• Before appliance commis-
sioning, check that electri-
cal connections are secu-
rely fi xed
• Before
commissioning,
make sure that the ap-
pliance and its metal ac-
cessories are connected to
a system for equipotential
bonding
ENGLISH
Safety device
• Protection
panels
• System
switch-di-
sconnector
Equipoten-
tial bonding
system
11
Publicidad
