SICE FIT LINE 32 Manual De Instrucciones página 119

If, during inflation, the tyre does not seat on the rim because of the excessive gap betwe-
en tyre/rim, it is possible to use an air-pressure airblast through jaws on GP accessory.
Verify that both upper and lower tyre beads and rim bead seat have been properly lubri-
cated with an approved mounting paste.
FitLine 32 - 32 2V / FitLine 32 GP - 32 GP 2V
- Make sure that the wheel is secured to the table
top with inside clamping (Fig. 38).
- Remove the valve core if it had not already been
removed. Connect the fitting Doyfe inflation hose to
the valve stem (Fig. 40).
User Manual FITLINE 32 - 32 2V - 32 GP - 32 GP 2V
- Bring the horizontal arm to the fully extended position.
lower the vertical rod until it touches the rim (Fig. 33).
- Lock the horizontal arm and the vertical rod in this
position (Fig. 39).
39
38
UK
40
119