Holzmann FKS305V32TOP 400V Instrucciones De Servicio página 43

Saw blade
The material of the workpiece and the saw blade teeth are important criteria for a precise cutting
result. Both the number of teeth and their shape, arrangement and position are associated with a
specific function.
To improve the quality of the cut, always make sure that several teeth (at least 2-3) cut through the
workpiece at the same time. If only one tooth is working, the result is a poor machining surface
and the risk of kickback, vibrations and sound pollution increase.
Only work with a well ground saw blade!
suitable saw blade
Riving knife
Saw blade guard
Saw blade height adjustment
Adjustment of the saw blade tilt
HOLZMANN Maschinen GmbH
Adjust the distance and parallelism between the riving
knife and the saw blade with the setting screws
- To do this, loosen the nut (1) slightly
- Make adjustments with setting screws (2)
- Retighten the nut
NOTE:
of the riving knife must be within 0-2 mm.
NOTE:
riving knife must be always within 3-8 mm.
Adjust the saw blade guard (1) so that the saw blade is
protected. The distance between the saw blade guard
and the workpiece should be max. 5 mm.
Turn the hand wheel (1) clockwise to lift the saw blade
upwards. Turn the hand wheel counterclockwise to
lower the saw blade. The height of the saw blade must
be adjusted so that the teeth hit the top of the work-
piece.
Turn the hand wheel (1) clockwise to tilt the saw blade. Turn the hand
wheel counterclockwise to move the saw blade in a vertical position
again. The saw blade can be tilted from 0° to 45°. The current position
can be seen on the display (2).
www.holzmann-maschinen.at
unsuitable saw blade
The distance between the saw blade and the top
The distance between the saw blade and the
ASSEMBLY
43
FKS305V32TOP_400V