Publicidad
Idiomas disponibles
Idiomas disponibles
Increase belt tension:
Loosen nut (S1) and unscrew slightly. With the
nut (S2) the motor can now be shifted in the
direction (+) of more belt tension.
When correct tension is reached. Tighten the
nut (S1) firmly again.
For changing the belt insert Allen key into motor tensioning screw (1), push tensioner to the left
to release belt tension completely, pull the belt over the pulleys and insert new belt. Push the
motor tensioner back to the right and establish correct belt tension again.
After completion, close the maintenance door.
Swivel arm guide rollers
16.3
Storage
Store the machine in a dry, frost-proof and lockable place when not in use. Disconnect the
machine from the power supply. Make sure that unauthorised persons and especially children do
not have access to the machine.
Improper storage can damage and destroy important components. Only store packed
or already unpacked parts under the intended ambient conditions!
HOLZMANN Maschinen GmbH
Scoring saw blade:
• Lift the motor (5)
• Replace the old belt (6) with a new one.
• Position new belt
Cleand swivel arm
By turning the 4 screws (1) you can close or move away
the eccentric guide rollers and adjust a smooth running
www.holzmann-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
Do not over-tension the belt!
Tension the belt only until
sufficient power transmission is
ensured.
Decrease belt-tension:
Loosen nut (S2) and unscrew slightly. With the
nut (S1) the motor can now be shifted in the di-
rection (-) of less belt tension.
When correct tension is reached. Tighten the
nut (S2) firmly again.
N O TE
N O TE
FKS305V32TOP_400V
51
Publicidad
