Angled Cuts With Inclined Saw Blade; Longitudinal Cut Of Boards; Operating; Switch The Machine On And Off - Holzmann FKS305V32TOP 400V Instrucciones De Servicio

Angled cuts with inclined saw blade

Symbolpicture

Longitudinal cut of boards

Use the down holder for cutting and fixing boards and avoiding a kickback.
15.3

Operating

Switch the machine on and off

Switch on the machine:
1. Turn main switch (7) to position I (ON).
NOTE: Power indicator light (1) lights on.
2. The main saw blade starts after pushing the button (2) I(ON).
3. The scoring saw blade starts after pushing the button (4) I(ON) (and can switched off by pushing
button (5) 0(OFF)).
NOTE:
The scoring swaw blade can only be started when the main saw blade is activated.
Switch off the machine:
Normal switch-off:
1. After finishing cutting, switch off the saw by pushing the 0(OFF) button (3)..
2. After finishing work, turn the main switch (7) to position 0(OFF).
Switching off in emergency situations:
Press the emergency stop (6).
CAUTION: The emergency stop button (6) can only be unlocked after the emergency situation has
been eliminated.

Cutting

• Operating instructions read and followed
• Type of cut and appropriate machine setting selected.
• Switch on the machine
• Wait until saw blade has reached full speed (approx. 10 sec.)
HOLZMANN Maschinen GmbH
- Adjust the desired inclination of the saw blade (13).
- Adjust the saw blade guard (14).
- Adjust the rip fence (15) or the cross-cut fence (16).
- Fix the workpiece with the downholder (17).
- Mount the down holder (1) in the groove of the sliding
table.
- Set the desired dimension with the rip fence or the
cross-cut fence.
www.holzmann-maschinen.at
OPERATION
47
FKS305V32TOP_400V