Publicidad
Idiomas disponibles
Idiomas disponibles
After adjusting the saw blade tilt, adapt the rip fence and/or the cross-cut fence so that
they do not become contact with the tilted saw blade.
Scoring saw blade
Adjustment of the cutting width at rip fence
Adjustment outrigger table
Cross cut fence
HOLZMANN Maschinen GmbH
Heihght of the scoring saw blade (1)
Lateral adjustment oft he scoring saw blade(1)
NOTE:
adjusted so that it cuts a slot with a depth of 1.5 - 2mm.
The cutting width can be adjusted on the rip fence and can
be read off the ruler (1).
• Claming lever (2) in position A:
Rip fence locked
Claming lever (2) in position B:
•
rip fence unlocked and moveable
• Claming lever (2) in position C:
Make fine adjustment using knurled screw (3)
www.holzmann-maschinen.at
N O TE
-
Turning the setting wheel (2) to the left .
-
Turning the setting wheel (2) to the right .
-
Turning the setting wheel (3) to the left
-
Turning the setting wheel (3) to the right
When using the scoring blade, the height must be
After losing the clamping leverss (1), the outrigger
table (2) can be moved along the slot in the sliding
table. After reaching the desired position, tighten
the clamping levers again.
- Position the outrigger table by loosening the
clamping levers (1) and pushing the outrigger
table into position.
- Adjust the crosscut fence by loosening the
clamping screws (2) and moving the flip stops.
- Read off the set measurement from the scale
(4).
- Extend the cross-cut fence by loosening the
locking knob (3) and pulling out the.
- Tighten the locking knob again.
NOTE:
If the workpiece extends more than
1950 mm to the left beyond the saw blade, the
cross-cut fence must be extended.
Adjusting the distance to the saw blade:
- Remove crosscut fence
- Loosen groove stone (5) and pivot mount (7)
with Allen key (6) and wrench (8).
- Reassemble crosscut fence and fix in desired
position with clamping lever (9).
NOTE:
The groove stone can be fixed to define a
specific position
- Adapt scales to the distance after loosening the
fixing screws (10)
ASSEMBLY
.
.
44
FKS305V32TOP_400V
Publicidad
