Flex FX7221 Manual Del Operador página 20

TO ATTACH AND REMOVE THE SMART
GUARD SYSTEM OR RIVING KNIFE
(FIG. 5a-5d)
WARNING
performing any assembly or adjustments, or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
WARNING
the table saw. A loose smart guard system may
slip into the blade and be thrown towards you.
Positioning the smart guard system or riving
knife
a. Turn off the saw and disconnect the battery
pack.
b. Remove the table insert.
c. Raise the blade as high as it will go by
rotating the elevation wheel clockwise and
set the blade perpendicular to the table, 0°
on the blade bevel scale.
d. Unlock the guard release lever by rotating it
clockwise so that it points upward (Fig. 5a).
e. Slide the smart guard system (Fig. 5b)
or riving knife (Fig. 5c) into the mounting
position behind the release lever. Align and
engage the notches in the smart guard
system or riving knife with the pin.
f. Lock the guard release lever by rotating it
counterclockwise. Firmly push the release
lever to secure the smart guard system or
riving knife, and then push/pull it to verify that
it is locked in place (Fig. 5d).
g. To remove the smart guard system or riving
knife, unlock the release lever and pull the
guard toward the release lever to disengage
the notches in the guard system or riving
knife from the pin. Then pull the guard system
or riving knife out.
Detach the battery pack
from the tool before
Fully secure the smart
guard system before using
Fig. 5a
Fig. 5b
Fig. 5c
Fig. 5d
-20-
Release Lever
Notches
Notches