Flex FX7221 Manual Del Operador página 24

Smart guard system and riving knife storage
When not in use, the smart guard system and/or
riving knife can be stored under the table.
Slide smart blade guard assembly and/or riving
knife into holder as shown, then turn lock 1/4
turn to lock the smart guard system in place.
Anti-kickback pawls storage (Fig. 9f)
When not in use, store the anti-kickback pawls
under the right side of the table.
Slide the anti-kickback pawls across the storage
bracket and release pawl release button to lock
into place.
Allen key storage (Fig. 9g)
When not in use, store the Allen key under the
table.
a. Insert the long end of the Allen key into the
plastic loop.
b. Snap the short end into the Allen key storage
port.
Never insert the long end
WARNING
of the Allen key into the
storage port. Allen key contacting the spinning
blade may create a hazardous situation.
Blade wrench storage (Fig. 9g)
When not in use, store the blade wrench on
the blade wrench bracket under the table.
Line up the mounting hole on the blade
wrench with the threaded rod on the blade
wrench bracket, and slide the blade wrench
onto the threaded rod until the blade wrench
nests in the blade wrench bracket.
To secure the blade wrench in place,
install the wingnut provided onto
the threaded rod, and tighten.
(Fig. 9e)
Fig. 9d
Fig. 9e
Fig. 9f
Fig. 9g
Plastic Loop
-24-
Smart Guard
System
Lock
Anti-kickback
Device
Wingnut Blade Wrench
Storage
Port
Allen Key