Flex FX7221 Manual Del Operador página 34

AUTO-STOP (FIG. 19a-19b)
This table saw is equipped with an auto-stop
feature, which automatically shuts off the saw
when the cut is complete.
To use auto-stop feature
a. Install the battery pack.
b. Press the auto-stop button, the auto-stop
indicator will light up.
c. Press the green button to turn the table saw
on.
d. Start the cut.
e. As soon as the auto-stop sensor detects
that the cut is finished, the saw will stop
automatically, and the auto-stop feature along
with the auto-stop indicator will turn off.
f. Press the auto-stop button again to reactivate
the auto-stop feature for the next cut.
WARNING
cut, examine the auto-stop sensor and
remove saw dust from it.
This table saw must be used only with the
battery packs and chargers listed below:
2.5Ah 3.5Ah 5.0Ah
FX0111 FX0321 FX0121
NOTE: Please refer to the battery pack and charger manuals for detailed operating information.
If auto-stop fails to turn off
the saw at the end of the
Battery Pack
6Ah 8.0Ah
FX0331 FX0221
Fig. 19a
Auto-stop Button
Fig. 19b
10Ah 12Ah
FX0341 FX0231 FLEX
FX0411
-34-
Auto-stop Indicator
Auto-stop Sensor
Charger
FLEX FLEX
FX0421 FX0431
FLEX
FX0451