Flex FX7221 Manual Del Operador página 33

WARNING
product damage due to a short circuit, never
immerse your charger or battery pack in
fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc. can
cause a short circuit.
WARNING
this product until the parts are replaced. Use
of this product with damaged or missing parts
could result in serious personal injury.
WARNING
serious personal injury, always remove the
battery pack from the tool when assembling
or adjusting parts.
POWER SWITCH (FIG. 18)
NOTE: This table saw has a safety feature that
helps prevent accidental starting. When power
is cut to the saw, the tool will switch to the off
mode. Once power is restored, the tool will
need to be turned on again.
To turn saw on, press the green ON button.
To turn the saw off, press the red paddle
(which depresses the red OFF switch
underneath).
To prevent unauthorized use, the power switch
can accommodate a padlock (not provided with
the table saw) with a 3/16" (4.8 mm) diameter
shackle (Fig. 18).
OPERATING INSTRUCTIONS
To reduce the risk of fire,
personal injury, and
If any parts are damaged
or missing, do not operate
To prevent accidental
starting that could cause
WARNING
does not fit all operators in the same way. Make
sure the eye protection chosen has side shields
or provides protection from flying debris both
from the front and sides.
WARNING
and gloves when handling saw blades.
WARNING
metals, such as aluminum or copper, even
with a special blade designed to cut these
materials.
WARNING
any masonry material, even with abrasive
cutoff wheels.
Fig. 18
Green Button
-33-
Always wear eye
protection. Eye protection
Always wear hearing
protection during cutting
This table saw is not
recommended for cutting
This table saw is not
recommended for cutting
Red Paddle