Flex FX7221 Manual Del Operador página 35

BATTERY LEVEL INDICATOR (FIG. 20)
This table saw features battery level indicator
that displays the battery charge level.
Press the battery level indicator button and the
LEDs will light up for approximately 10 seconds
to communicate the battery pack charge level:
NOTE: To check the current battery charge
level, please turn off the table saw first and then
press the battery level indicator button.
NOTE: If the battery level indicator button is
pressed while the table saw is connected to the
power adapter, all four LEDs of the power indi-
cators will light up.
Battery Pack Charge Level
100% - 75%
75% - 50%
50%-25%
25% - 10%
< 10%
DUST EXTRACTION (FIG. 21)
Dust Port
The dust port on this table saw is compatible
with any vacuum or vacuum accessory
with a 2-1/4 inch outside diameter. For
vacuums with a different outside diameter,
an adapter (not included) must be used.
Dust Elbow
To better contain dust when cutting without
using an attached vacuum, this Table Saw
comes with a dust elbow. Remove the dust
elbow from the storage position and insert
it into the dust port. If further containment
of the dust is required, place a five-gallon
bucket approximately 1 foot behind the saw,
under the dust port (Fig. 21). The majority of
Fig. 20
Battery Level
Indicator Button
Power Indicator
Fig. 21
the dust will be directed out the dust elbow
and into the bucket. When done cutting,
return the dust elbow to its storage position.
-35-
Battery Level Indicators
Light Pattern
Solid for 10s
Solid for 10s
Solid for 10s
Solid for 10s
Flashing for 10s