Mx Onda MX-VC2650 Manual De Usuario E Instalacion página 36

Notes:
6. After connecting to electricity, when it is turned on, the plate buzzer rings
once,
All indicators turn on for 1 second and then turn off.
7. When the plate is in standby mode, if not practiced within 1 minute, the
electric plate will automatically turn off and the doorbell will beep.
8. To turn on the hob, press the ON/OFF control button and hold it for about 3
seconds; To turn it off, you just need to press the ON/OFF button again.
9. Power level can be adjusted from 0 to 9, the default setting is level 5.
10. The heat setting indicator for the selected zone flashes during setting.
After setting, the number flashes for 5 seconds and then stops flashing, then
the setting will be confirmed.
To turn off the hob
3. You can turn off the cooking zone by adjusting the heat setting to level
0, the indicator of which shows "
4. You can also turn off the entire board by touching the ON/OFF control
button.
Nota: Si se corta la energía durante la cocción, se cancelarán todos los
ajustes.
Nota: El ventilador de refrigeración de la placa de inducción permanecerá
encendido durante aproximadamente 1 minuto después de apagar la
placa.
USING A GLASS CERAMIC PLATE WITH LARGE HEATING AREA
Some models of ceramic hobs may have one or more extended cooking zones
(oval/double/triple zone); These extended zones can provide a larger cooking area and
additional heat to accommodate different sizes of cooking vessels.
To use the extended zone when the board is working, follow
the following:
4. Select and activate the cooking zone you want to use extended
zones:
Touch the heating zone selection control button to select and
activate to make adjustments.
5. The central zone will turn on when the heating is first set.
level for extended cooking zone.
6. When the heating zone is selected and active (power level
indicator flashing), touch the extended zone control button to
activate the extended heating element for a large heating area.
-".
11