Mx Onda MX-VC2650 Manual De Usuario E Instalacion página 39

4. Touch the timer control button, the number on the timer indicator flashing.
•Touch the timer control button once, the single digit number on the timer
indicator flashes, then adjust a single digit of the minute hand setting by
sliding the slider.
• Press the timer control button again, the tens digit number on the timer
indicator flashing, then adjust the tens digit minute timer setting by sliding the
slider.
Note: By continuously touching the timer control button, the slider works with the
following consequence: "Single digit-Tens digit -Confirm setting-Single digit-..."
5. When the minute hand is set, it will start counting down immediately, the
screen will show the remaining time.
6. The buzzer will ring for 30 seconds and the timer indicator "- - "will be
displayed when the timer time ends. Any efficient touch of control buttons
during it would end up ringing the doorbell.
Set the timer to turn off the cooking zone
6. Touch the cooking zone selection control button to select the cooking zone
for which you want to set the timer.
7. Touch the timer control button, the number on the timer indicator flashing.
8. Then adjust the timer settings.
• Touch the timer control button once, the single digit number on the timer
indicator flashes, then adjust a single digit of the minute hand setting by
sliding the slider.
• Press the timer control button again, the tens digit number on the timer
indicator flashing, then adjust the tens digit minute timer setting by sliding
the slider.
9. When the timer is set, it will start counting down immediately, the screen will show the
remaining time.
10. When the cooking timer expires, the corresponding cooking zone cooking will
turn off automatically.
Note: The red dot next to the power level indicator will illuminate for those zones that will
be set with a timer. You can check the timer settings of different timer-set cooking zones
by activating this cooking zone.
14