Mx Onda MX-VC2650 Manual De Usuario E Instalacion página 38

Activate the Stop and Continue function
3. To activate the Stop and Go function, you can press the Stop and Go function button
once. Then all programmer settings are maintained and the hob stops heating, all heat
setting indicators show "P".
Deactivate the Stop and Continue function
To cancel the Stop and Go function, you can press the Stop and Go function again
after returning. Then, all programmer settings will return to the way they were, the
Stop and Continue "P" indicator will disappear from all indicators.
When the Stop and Go function is active, all control buttons are disabled except the
ON/OFF button and Stop and Go.
Note: The hob will automatically turn off if the Stop and Continue function lasts more
than 10 minutes.
TIMER
When the hob is on, you can use the timer in two different ways:
• You can use it as a minute tracker. In this case, the timer will not turn off any cooking
zone when the set time expires.
• You can set it to turn off one or more cooking zones.
• You can set the minute hand/timer up to 99 minutes.
Timer Description
Timer control
Use the timer as a minute reminder
If you have not selected any cooking zone
Minute display shows
the number of minutes
13