Mx Onda MX-VC2650 Manual De Usuario E Instalacion página 49

•
If the cable is damaged, to be replaced or replaced, the operation must be
carried out by an Official Mx Onda Technical Service.
•
If the ceramic hob is connected directly to the mains, a single-pole switch must
be installed with a minimum opening of 3 mm between the contacts.
•
The authorized installer must ensure that the correct electrical connection has
been made and that it complies with safety regulations.
•
The cable must not be bent or compressed.
•
The cable should be checked regularly and replaced only by authorized
technicians.
•
The yellow/green wire of the power cable must be connected to the ground of
the mains socket.
•
The manufacturer is not responsible for any accident resulting from the use of
an ungrounded appliance or defective grounding continuity.
•
If the device has a power outlet, it must be installed so that the power outlet is
accessible.
24